AJAX Hub User Manual page 49

Setting
First field
Room
Delay when entering, sec
Delay when leaving, sec
Delays in night mode
Arm in night mode
Sensitivity
Detector name, can be edited
Selecting the virtual room to which the device is assigned
Selecting delay time when entering
Selecting delay time on exit
Delay turned on when using night mode
If active, the detector will switch to armed mode when using
night mode
Choosing the sensitivity level of the motion sensor.
For MotionProtect:
•
High — for premises with a minimum amount of obstacles,
motion is detected as quickly as possible
• Medium — for premises with potential obstacles (windows, air
conditioner, heating element, etc)
• Low — ignore pets weighing up to 20 kg and up to 50 cm tall
For MotionProtect Plus:
•
High — the detector disregards cats (under 25 cm)
•
Medium — disregards small dogs (under 35 cm)
Value