AJAX Hub User Manual page 92

The keypad is a stationary keypad and is located inside a room. It allows to set the system in the armed mode with a
digital code or by pressing one button, switch on the night mode, disarm the room, notify the private security
company of the forcing to switch off the security system (by no means disclosing the user).
Keypad is furnished with light indicators signaling about the security system status, about any problems with the
detectors or interruption of the communication with the hub. Big touch-sensitive buttons are highlighted, if the device
is activated by touch – the code may be entered without external lighting. Service life from pre-installed batteries –
up to 2 years.
Keypad operation indication
When the keypad wakes up, the LED lights, corresponding to the operating mode of the security system.
Indicators display the current status of the system: in armed mode / disarmed mode / night mode.
Information is up to date even if the status was changed by any other control device – application, fob. The status is
updated if the device is waked up by touch.
Event
LED blinks (Х)
Indication
Indicator notifies of a fault in the Ajax security system, as well
as lights up, if the keypad cannot connect to the hub. You may
check the nature of the fault in the
application
Ajax Security System