AJAX Hub User Manual page 45

Parameter
Temperature
Jeweller Signal Strength
Connection
Battery Charge
Lid
Delay when entering, sec
Delay when leaving, sec
Routed through ReX
Sensitivity
Always Active
Firmware
Device ID
Settings
Value
Temperature of the Detector. Measured on the processor and
changes gradually
Signal strength between the hub and the detector
Connection status between the hub and the detector
Battery level of the detector, displayed in increments of 25%
The tamper mode of the detector, which reacts to the detachment
of or damage of the body
Delay time when entering
Delay time when exiting
Displays the status of using the ReX range extender
Sensitivity level of the motion sensor
If active, the motion detector is always in the armed mode
Detector firmware version
Device identifier