gefran SIEIDrive ADV100 Functions Description And Parameters List page 40

Menu PAR Description
10.5 950 Speed threshold 1
Setting of speed threshold 1 (upper). When the threshold is exceeded the Speed threshold signal is disabled, with
a delay that can be set in Speed threshold dly.
Menu PAR Description
10.6 952 Speed threshold 2
Setting of speed threshold 2 (lower). When the threshold is exceeded the Speed threshold signal is disabled, with a
delay that can be set in Speed threshold dly.
Menu PAR Description
10.7 954 Speed threshold dly
Setting of the delay after which the transition from 0 c1 is activated. The transition from 0 c1 occurs when the
speed is within the set limits. The Speed threshold signal transition from 1 c 0 is always immediate.
If the motor speed is between Speed threshold 1 and Speed threshold 2, the Speed threshold signal is active. If
Speed threshold 1 < Speed threshold 2 the Speed threshold signal is not significant.
Menu PAR Description
10.8 960 Set speed ref src
Selection of the origin (source) of the signal used as speed reference and on which the speed reached control is per-
formed (for control with ramp, use Ramp setpoint, for control without ramp, use Speed setpoint). The signal that
can be used as the speed reference can be selected from among those listed in the "L_CMP" selection list.
Menu PAR Description
10.9 962 Set speed error
Setting of the bandwidth of the tolerance within which, even if the speed is not equal to the reference, the two values
are considered to coincide and the Set speed signal is enabled.
Menu PAR Description
10.10 964 Set speed delay
Setting of a delay in ms before the signal (Set speed programmed on a digital output), if the speed is within a toler-
ance band defined by the Set speed error parameter, after which the transition from 0 c1 is enabled.
The transition of the Set Speed signal from 0 c1 is always immediate.
40
UM Type FB BIT
rpm INT32
UM Type FB BIT
rpm INT32
UM Type FB BIT
ms UINT16
UM Type FB BIT
LINK 16/32
UM Type FB BIT
rpm INT16
UM Type FB BIT
ms UINT16
Def Min
0 CALCI
Def Min
0 CALCI
Def Min
0 0
Def Min
628 0
Def Min
100 0
Def Min
0 0
ADV100 • Functions description and parameters list
Max Acc Mod
CALCI RW FVS
Max Acc Mod
CALCI RW FVS
Max Acc Mod
50000 RW FVS
Max Acc Mod
16384 ERW FVS
Max Acc Mod
CALCI RW FVS
Max Acc Mod
50000 RW FVS