gefran SIEIDrive ADV100 Functions Description And Parameters List page 102

Menu PAR Description
22.10.5 3328 Energysave trqband 2
This parameter is used to set a percentage used to calculate a range around the torque current the moment output
voltage reduction is aborted. The torque current is saved at the end of the voltage reduction phase. if the torque
current is not within the calculated range, due to a change in the load while functioning at low voltage, the output
voltage requested by the V/f curve must be restored.
Menu PAR Description
22.10.6 3340 Energysave out
This parameter is used to read the request to reduce the output voltage.
102
UM Type FB BIT
perc FLOAT
UM Type FB BIT
FLOAT 16/32BIT
Def Min
10.0 0.0
Def Min
0.0 0.0
ADV100 • Functions description and parameters list
Max Acc Mod
100.0 ERWS _V_
Max Acc Mod
1.0 ER _V_