gefran SIEIDrive ADV100 Functions Description And Parameters List page 13

8 Enc 1
264 Enc 2
520 Enc 3
776 Enc 4
4 Can/Dnet
255 Unknown
Note!
SLOT 3 indicates the presence of the CAN on the regulation card in versions ADV100-...-C
Menu PAR Description
2.21 536 Slot 1 card S/N
2.22 538 Slot 2 card S/N
2.23 540 Slot 3 card S/N
The serial number of the expansion card installed in the relative slot of the drive is displayed.
Menu PAR Description
2.24 546 Fw enc sl2 ver.rel
The version and release number of the encoder firmware used in the drive are displayed. On the keypad these are
displayed in version.release format. When the parameter is read via serial line or fieldbus the version is returned in
the high byte and the release in the low byte.
Menu PAR Description
2.25 548 Fw enc sl2 type
The type of firmware installed in the encoder is displayed.
ADV100 • Functions description and parameters list
UM Type FB BIT
UINT32
UINT32
UINT32
UM Type FB BIT
UINT16
UM Type FB BIT
UINT16
Def Min
0 0
0 0
0 0
Def Min
0 0
Def Min
0 0
Max Acc Mod
0 R FVS
0 R FVS
0 R FVS
Max Acc Mod
0 R FVS
Max Acc Mod
0 R FVS
13