gefran SIEIDrive ADV100 Functions Description And Parameters List page 19

Note !
The Load Default command (par. 580) does not modify this parameter.
Menu PAR Description
4.15 580 Load default
Transfers the standard factory settings to the drive memory ("Def" column in the parameters table).
Menu PAR Description
4.16 590 Save par to keypad
Transfers the parameters currently stored in the drive and saves them in the keypad memory (See ADV100 Quick
Start manual, chapter 6.8).
Menu PAR Description
4.17 592 Load par from keypad
Transfers the parameters from the keypad memory to the drive (See ADV100 Quick Start manual, chapter 6.9).
Menu PAR Description
4.18 594 Keypad memory select
Selection of the area of the keypad memory to which to transfer and save the parameters stored in the drive.
Menu PAR Descrizione
4.19 596 Salva par->card SD
Transfers the drive parameters to the SD memory card (See chapter 8.9 of the Quick start-up guide).
Menu PAR Descrizione
4.20 598 Carica par<-card SD
Transfers the parameters from the SD memory card to the drive (See chapter 8.9 of the Quick start-up guide).
ADV100 • Functions description and parameters list
UM Type FB BIT
BIT
UM Type FB BIT
BIT
UM Type FB BIT
BIT
UM Type FB BIT
UINT16
EU Tipo FB BIT
BIT
EU Tipo FB BIT
BIT
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
1 1
Def Min
0 0
Def Min
0 0
Max Acc Mod
1 RWZ FVS
Max Acc Mod
1 RW FVS
Max Acc Mod
1 RWZ FVS
Max Acc Mod
5 ERW FVS
Max Acc Mod
1 RW FVS
Max Acc Mod
1 RWZ FVS
19