gefran SIEIDrive ADV100 Functions Description And Parameters List page 31

Active speed ref
Multi reference 14
Multi reference 15
The following figure describes the selection of a control for 8 Multispeeds.
Speed
Multi ref 0
Multi ref sel 0src
Multi ref sel1 src
Multi ref sel 2src
Start
Menu PAR Description
7.23 850 Multi ref sel mon
The multispeed that has been selected using the digital commands or by the digital inputs selected in the terminal
strip.
Menu PAR Description
7.24 852 Multi ref out mon
The selected speed reference on the Multispeed block output is displayed.
ADV100 • Functions description and parameters list
Multi ref sel 0 src
0
1
Selected by:
Multi ref0 src (par. 832)
Multi ref1 src (par. 834)
Multi ref2
Multi ref 1
UM Type
UINT16
UM Type
rpm INT16 16/32
Multi ref sel 1 src Multi ref sel 2 src
1
1
Multi ref 3
Multi ref 4
Multi ref 5
FB BIT Def
0
FB BIT Def
0
Multi ref sel 3 src
1 1
1 1
Multi ref 6
Multi ref 7
t
Min Max
0 15
Min Max
0 0
Acc Mod
R FVS
Acc Mod
R FVS
31