Siemens SINAMICS G110D Series Getting Started page 45

pasted into another application such as Notepad to allow a permanent record of the
configuration to be stored.
Ensure that "Then start commissioning wizard" is selected and click "Finish".
The "Control Method" dialog is displayed.
Image 5-7
Select the required control method and click "Next". The command and setpoints source
dialog is displayed.
SINAMICS G110D
Getting Started, 07/2016, FW V3.63, A5E38556288B AA
Select control method dialog
Commissioning
5.1 Commissioning with STARTER
45