Download Print this page

Factory Reset - Siemens SINAMICS G110D Series Getting Started

Distributed converter
Hide thumbs

Advertisement

Factory Reset

6.1
Factory Reset
Description
With a factory reset a defined initial state of all of the inverter parameters can be re-
established.
To perform a factory reset with STARTER, the inverter must be in the online mode. If it is
offline, perform "connect to target system" (
The factory reset is performed in the following steps:
Select the drive unit in the navigation tree (
● Click the factory reset icon (
Note
When resetting the parameters to the factory setting, the communications memory is re-
initialized. This means that communications are interrupted for the time it takes to perform
the reset.
SINAMICS G110D
Getting Started, 07/2016, FW V3.63, A5E38556288B AA
)
)
).
6
59

Advertisement

loading

  Related Manuals for Siemens SINAMICS G110D Series