Setting The Key Tone; Disabling The Noise Cancellation; W59R Bluetooth; Enabling / Disabling The Bluetooth - Yealink W90B User Manual

Vibrate then Ring: The handset will vibrate four times and then start ringing.
•
Off
•
Note: If the silent mode is activated, the handset will not vibrate and ring.
Procedure
1. Go to OK > Settings > Audio > Vibrator.
2. Select the desired method.

Setting the Key Tone

If you enable the key tone, the phone will produce a sound when you press the keypad. It is only applicable
to DD phone.
Procedure
1. Go to Menu > Settings > Basic Settings > Sound > Key Tone.
2. Select the desired value from the Key Tone field.
3. Confirm the action.

Disabling the Noise Cancellation

Noise cancellation helps improve intelligibility of speech in noisy environments. You are allowed to disable
it.
About this task
It is only applicable to W59R.
Procedure
1. Go to OK > Settings > Audio > Noise Cancellation.
2. Disable the noise cancellation.
3. Confirm the action.

W59R Bluetooth

The W59R handset can be used with a Bluetooth headset. By default, the Bluetooth feature is disabled. To
be able to use Bluetooth, it must be enabled.
For a list of supported Bluetooth headsets, refer to
•

Enabling / Disabling the Bluetooth

• Pairing Devices
• Managing Paired Headsets
• Editing Device Name of Your Phone
Enabling / Disabling the Bluetooth
Appendix C - Bluetooth Headset Compatibility List
| W59R Bluetooth | 64
.