Power Saving Mode; Entering Characters; Setting The Input Modes - Yealink W70B User Manual

On the CP935W, go to More > Status > Power Percent.
The screen shows the remaining talk time and standby time.

Power Saving Mode

The power saving feature is used to turn off the backlight and screen to conserve energy. The CP935W
enters power-saving mode after it has been idle for a certain period of time.
Note: It is only applicable to CP935W.
Procedure:
Go to More > Basic > Power Saving.
Parameter
Office Hour
Idle Timeout (Minutes)

Entering Characters

You can enter and edit data in the corresponding field using the keypad.
•

Setting the Input Modes

• Entering Data on the W73H/W78H/W56H/W53H/W59R/W57R
• Entering Data on the CP930W/DDPhone
• Entering Data on the CP935W
Setting the Input Modes
The handset provides you with 12 input modes, and different input mode provides different characters. The
default input modes are Abc, 123, ABC and abc. You can enable the input modes used frequently.
Description
Tap to add working hours according to your needs.
• Office Hour Idle Timeout: It configures the time (in minutes)
to wait in the idle state before the phone enters power-saving
mode during office hours. Valid value: integer from 1 to 960.
• Off Hour Idle Timeout: It configures the time (in minutes) to
wait in the idle state before phone enters power-saving mode
during the non-office hours. Valid value: integer from 1 to 10.
User Input Extension Idle Timeout: It configures the minimum
•
time (in minutes) to wait in the idle state after using the phone
before entering the power-saving mode. Valid value: integer
from 1 to 30.
| Getting Started | 35