Connect Dc Battery Frame Ground - Avaya S8700 Installing Manual

Grounding for DC power cabinet
2
Figure notes
DC power cabinet
1
To Approved Ground
2
3 1 AWG (#70) (7 mm
Ground Discharge Bar
4

Connect DC Battery Frame Ground

1 Cut a length of 6 AWG (#40) (4 mm
cabinet and the DC battery cabinet. See
Battery Cabinet'' on page
Crimp a terminal lug on the each end of the wire. The terminal lugs are furnished as part
2
of D-181895, kit of parts.
3 At the DC battery cabinet, attach the 6 AWG (#2540) (6 4 mm
ground mounting hole using a pan head slotted screw, star washer, and hex nut. Tighten
the screw securely.
Route the opposite end of the wire to the DC power cabinet.
4
5 Attach the 6 AWG (#40) (4 mm
a pan head slotted screw, star washer, and hex nut. Tighten the screw securely.
3
1
dc_rect1 RBP 051396
2
) Wire
2
) wire long enough to reach between the DC power
''Frame Ground Wiring Between cabinet and
108.
2
) wire to the mounting hole in the top of the cabinet. Use
October 2002
Installing an Avaya SCC1 Media Gateway Stack
2
) wire to the frame
107
4