220
Connecting to the Customer's Network
.
change ip-interfaces
Enable
Eth Pt Type
y
y
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
7
Type in the following information:
NOTE:
Enable the Ethernet port last, after you have filled in the information in the other fields.
8
Press
Refer to the Administration for Network Connectivity for Avaya MultiVantage Software for
more information on these administration steps and for the steps to administer IP Softphones
and H.323 trunks.
Test the External Connection to the LAN
To test the external IP connections, ping the C-LAN and ping a known computer connected to
the network. If everything is configured correctly, the Result column on the Ping Results
screen reads pass. If it reads abort, verify the IP-address information and check the
connectivity, including the cabling.
Slot
Code Sfx Node Name
C-LAN
05B11 TN799
C sr1clan2
C-LAN
01A11 TN799
C traf-clan
Set Slot field to UUCSS, where UUCSS is the cabinet, carrier, and slot.
•
•
The Code and SFX fields are automatically populated with TN799DP.
In the Node Name field type the same node name entered on the Node Name
•
screen.
In the Subnet Mask field use the default setting unless you are given a different
•
subnet mask.
•
In the Gateway Address field use the address you are given or leave blank.
Set the Net Region field to 1 unless you are given a different number.
•
•
Set the Enable Eth Pt field to y
to save the information and effect the new settings.
Enter
October 2002
IP INTERFACES
Subnet Mask
255.255.248.0
255.255.248.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Page
1 of
15
Net
Gateway Address Rgn
172.16 .23 .254 3
172.16 .23 .254 2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.