Completing The Installation Administration; Verify Translations; View Alarms - Avaya S8700 Installing Manual

Completing the Installation
Administration
This section covers the following tasks:
''Verify translations'' on page 293
•
• ''View alarms'' on page 293
''Upgrade the IPSI firmware (if necessary)'' on page 294
•
''Enable and disable Ethernet switch ports'' on page 294
•
• ''Back up the media server to PCMCIA flashcard'' on page 295
''Release busied out media server'' on page 296
•
• ''View alarms'' on page 296
''Add INADS phone numbers'' on page 297
•
''Enable alarms to INADS via modem'' on page 297
•
• ''Register the system'' on page 298

Verify translations

The following administration is done on a computer used to access the Avaya S8700 Media
Server using Avaya Site Administration.
Type list configuration all and press
1
the system.
2 Type list ipsi and press
Check the administration status on the following items:
3
• list station
• list trunk-group
list hunt-group
•

View alarms

The following administration is done on a computer used to access the active media server
using the media server Web interface.
to view all the administered circuit packs in
Enter
to verify the location of the IPSI circuit packs.
Enter
October 2002

Completing the Installation Administration

293