Layout; Information Outlet Locations; Site, Satellite, And Adapter Locations; Sizing 4-Pair Station Cables - Avaya S8700 Installing Manual

Layout

This section has information about
• ''Information Outlet Locations'' on page 173
• ''Site, Satellite, and Adapter Locations'' on page 173
''Sizing 4-Pair Station Cables'' on page 173
•
• ''Sizing 25-Pair and Multiple 25-Pair Station Cables'' on page 173
''3-Pair Station Cable Circuits'' on page 174
•
''4-Pair Station Cable Circuits'' on page 174
•

Information Outlet Locations

The customer or marketing representative must provide floor plans showing the information
outlet locations and types (flush- or surface-mounted) required. The floor plans must also show
a complete overview of all conduit and cabling facilities in the building.

Site, Satellite, and Adapter Locations

Use the following information when determining site, satellite, or adapter locations.
Keep the number of locations to a minimum.
•
To minimize the station wiring distances, centrally locate the sites/satellites, or adapters
•
among the information outlets.
• Site/satellite locations must be easily accessible and contain AC-powered receptacles.
One 258A/BR2580A adapter is required for each 25-pair station cable containing 4-pair station
circuits. One 356A adapter is required for each 25-pair station cable containing 3-pair station
circuits. Hardware requirements are the same as for the equipment room.

Sizing 4-Pair Station Cables

Use the scale of the floor plan to determine the approximate length of the station cables required
per the standard SYSTIMAX wiring concepts.

Sizing 25-Pair and Multiple 25-Pair Station Cables

Use the scale of the floor plan to determine the approximate length of each 25-pair station cable.
The cables must be selected and properly sized to make maximum use of the hardware at the
equipment room or satellite location.
October 2002
173
Layout