1
Install two RJ11 jack outlets wired to a single 1MB (Measured Business) telephone line.
2
Connect the RJ11 jacks, one to each server, with the modular telephone cord supplied
with the modem.
3
Connect a USB cable (supplied with the modem) from one of the modems to server 1.
Connect the other modem, via USB cable, to server 2.
4
Separated servers
NOTE:
For more information on media servers in 2 locations, refer to the job aid entitled
Separation—Avaya S8700 Media
Each server has a dedicated telephone line.
1
Terminate the two 1MB telephone lines, one at each server, at RJ11 jack outlets.
Connect the modems to their respective server via a modular telephone cord supplied
2
with the modem.
3
Connect a USB cable (supplied with the modem) from the modem to the server at each
location.
Server.
October 2002
213
Connect the Hardware
Server