Festo CPX-FB14 Electronic Manual page 27

1. Installation
1
Setting the
station number
(switch elements
1−7)
Fig. 1/4: Setting the station number (8−element DIL switch)
Festo P.BE−CPX−FB14−E N en 0308a
Setting the station number with DIL switch
You can set the station number of the CPX terminal binary
coded with the 8−element DIL switch 3.
1
The following station numbers are permitted:
Protocol Address designation
CANopen Station number
Tab. 1/2: Permitted station numbers
Recommendation:
Assign the station numbers in ascending order. Adapt the
station numbers to suit the machine structure of your system.
Example: Set station num
ber: 05
Tab. 1/3: Examples of set station numbers (binary coded)
Example: Set station num
ber: 38
0 2
2 + 2 =
1 + 4 =
5
3
Permitted station
numbers
1; ...; 127
1 2 5
2 + 2 + 2 =
2 + 4 + 32 =
38
1−13