Designated Use - Festo CPX-FB14 Electronic Manual

Contents and general instructions

Designated use

VI
The field bus node type CPX−FB14 described in this manual
has been designed exclusively for use as a slave on the
CANopen field bus.
The CPX terminal may only be used as follows:
in accordance with designated use
in its original state
without any modifications by the user
in faultless technical condition.
The maximum values specified for pressures, tempera
tures, electrical data, torques, etc. must not be exceeded.
Observe also the standards specified in the relevant chapters,
as well as national and local laws and technical regulations.
Festo P.BE−CPX−FB14−E N en 0308a