Download Print this page

Safety Precautions; Assembly Note - FarmTek Growers Supply GrowSpan Estate Elite 104711 Instructions Manual

Attached greenhouses

Advertisement

GROWSPAN
ESTATE ELITE ATTACHED GREENHOUSES
YOU MUST READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE SHELTER.
Thank you for purchasing this GrowSpan™ greenhouse.
When properly assembled and maintained, this product will
provide years of reliable service. These instructions include
helpful hints and important information needed to safely
assemble and properly maintain the greenhouse. Please
read these instructions before you begin.
If you have any questions during the assembly, contact
Customer Service at 1-800-245-9881 for assistance.

SAFETY PRECAUTIONS

Wear eye protection.
Wear gloves when handling panels and frame parts.
Use a portable GFCI when working with power tools
and cords.
Do not climb on the greenhouse or framing during or
after construction.
Do not occupy the greenhouse during high winds,
tornadoes, or hurricanes.
Provide adequate ventilation if the structure is
enclosed.
Do not store hazardous materials in the greenhouse
without proper ventilation.
Provide proper ingress and egress to prevent
entrapment.
ANCHORING INSTRUCTIONS
Prior to assembling this greenhouse, please read the
MUST READ document included with the shipment.
WARNING: The anchor assembly is an integral part
of the greenhouse construction. Improper anchoring
may cause greenhouse instability and failure of the
structure. Failing to anchor the greenhouse properly
will void the manufacturer's warranty and may cause
serious injury and damage.
See additional anchoring information beginning on
page 24.
2
LOCATION
Choosing the proper location is an important step before
you begin to assemble the structure.
The following suggestions and precautions will help you
determine whether your selected location is the best
location.
Never erect the structure under power lines.
Identify whether underground cables and pipes are
present before preparing the site or anchoring the
structure.
Location should be away from structures that could
cause snow to drift on or around the building.
Do not position the greenhouse where large loads
such as snow and ice, large tree branches, or other
overhead obstacles could fall.
Always check local building codes before you begin.
SITE
After choosing a location, proper preparation of the site is
essential. The following site characteristics will help ensure
the integrity of the structure.
A level site is required. The site must be level to
properly and safely erect and anchor the structure.
Drainage: Water draining off the structure and from
areas surrounding the site should drain away from the
site to prevent damage to the site, the structure, and
contents of the structure.
WARNING: The individuals assembling this structure
are responsible for designing and furnishing all
temporary bracing, shoring and support needed during
the assembly process. For safety reasons, those who
are not familiar with recognized construction methods
must seek the help of a qualified contractor.

ASSEMBLY NOTE

The assembly of this greenhouse is not complex; however,
it does take time and additional assistance. For best results
and an overview of the entire assembly, read through
these instructions before you begin. Then, follow these
instructions as presented.
Examine all diagrams and photos and verify that you have
selected the proper parts from the correct box or boxes. Do
not mix parts from different boxes. When checking parts,
place the parts back into the same box they were removed
from and continue with the next box.
Cover the assembly surface with cardboard or similar
material to protect the greenhouse finish during
assembly.
Revision date: 01.01.16

Advertisement

loading