Advertisement
PANEL, PROFILE, AND SPRING LOCATION DIAGRAMS - 104713
32-8 Gutter Rail
Double Track Rafter (52)
ATTENTION: In the diagrams, the
letter U identifies the U-profile.
Vent Location
WIRE SPRING CLIP
IDENTIFICATION AND LOCATION
Revision date: 01.01.16
GROWSPAN
50 Ridge Beam
ATTENTION: During assembly, add one (1) extra bolt in
each of these rafter bolt tracks for the vent installation. Add 1
additional bolt to the identified rafters to attach the Z-bracket.
50 Ridge Beam
32-8 Gutter Rail
Vent Location
ESTATE ELITE ATTACHED GREENHOUSES
™
+2 Bolts
+1 Bolt
+2 Bolts
30-8 Base Rail
SIDE, VENT, AND ROOF PANEL
IDENTIFICATION DIAGRAM
S: Small Wire Spring Clip
L: Large Wire Spring Clip
Dashed lines (left) show where to
apply the silicone before setting
the panels into place.
Vent panels are secured in place
by silicone only.
+1 Bolt
+2 Bolts
51
Advertisement
