Required Tools; Safety Precautions - FarmTek 108681 Quick Start Manual

LAWN AND GARDEN
YOU MUST READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE WORK SEAT.
Thank you for purchasing this work seat. When
properly assembled and maintained, this product will
provide years of reliable service. These instructions include
helpful hints and important information needed to safely
assemble and properly maintain the work seat. Please read
these instructions before you begin.
If you have any questions during the assembly, contact
customer service for assistance.

SAFETY PRECAUTIONS

• Periodically check nuts and bolts to make sure they are
tight and secure.
• Do not use the work seat if any part is broken or
damaged.
• This work seat is not a toy. Do not let children use the
work seat unsupervised.
• Do not use on inclines; work seat may tip or roll away.
• Do not load your work seat with more than 300lbs.
• Do not load the tool tray with more than 5lbs.
• Do not inflate the tires more than 30psi. Inflate with
ambient air only.
• Never use a flammable gas to inflate the tires
2

REQUIRED TOOLS

The following list identifies the
main tools needed for assembly.
• Flat head screwdriver
• Phillips head screwdriver
• Metric wrench or socket set (or an small, adjustable
wrench)
• Pliers
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assembly.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts.
2. If anything is missing or you have questions, consult
the Pictorial Parts List, or contact customer service.
.
Revision date: 05.01.12