Advertisement
GROWSPAN
ESTATE ELITE ATTACHED GREENHOUSES
™
PANEL, PROFILE, AND SPRING LOCATION DIAGRAMS - 104711
32-8 Gutter Rail
ATTENTION: In the diagrams, the
letter U identifies the U-profile.
Vent Location
WIRE SPRING CLIP
IDENTIFICATION AND LOCATION
50
50 Ridge Beam
ATTENTION: During assembly, add one (1) extra
bolt in each of these rafter bolt tracks for the vent
installation. Add 1 additional bolt to two (2) of these
rafters to attach the Z-bracket.
50 Ridge Beam
32-8 Gutter Rail
S: Small Wire Spring Clip
L: Large Wire Spring Clip
Dashed lines (left) show where to
apply the silicone before setting
the panels into place.
Vent panels are secured in place
by silicone only.
+2 Bolts +1 Bolt +2 Bolts
30-8 Base Rail
SIDE, VENT, AND ROOF PANEL
IDENTIFICATION DIAGRAM
Revision date: 01.01.16
Advertisement
