FarmTek Growers Supply GrowSpan Estate Elite 104711 Instructions Manual page 4

GROWSPAN ESTATE ELITE ATTACHED GREENHOUSES
™
OVERVIEW
This section describes assembling your Elite greenhouse.
See illustration below to identify main parts of greenhouse.
1. Locate the required parts for each assembly procedure.
2. Preassemble the base frame, end walls and sidewalls.
3. Assemble the frame and install the ridge beam, rafters
and vents.
4. Square and anchor the greenhouse.
5. Assemble and install door.
6. Attach gutter rails ends.
7. Install the side, end and
roof polycarbonate panels.
8. Assemble and attach door,
door stops, down spouts, and
ridge beam end covers.
Gutter Rail
Vertical Support:
Sidewall
Actual strut position may
differ from what is shown
in this example.
4
Estate Elite Attached Greenhouses
ATTENTION: TO AVOID TWISTING OFF OR DAMAGING
THE FASTENERS, DO NOT OVERTIGHTEN.
FOR YOUR CONVENIENCE, ADDITIONAL FASTENERS
CAN BE FOUND IN THE "EXTRA PARTS" BAG OR BOX.
REFER TO THE BILL OF MATERIALS FOR A LIST OF
THE FASTENERS CONTAINED IN THAT BAG OR BOX.
Base Rail
GrowSpan
™
Ridge Beam
Rafters
Diagonal
Strut
Revision date: 01.01.16