Advertisement
GROWSPAN
ESTATE ELITE ATTACHED GREENHOUSES
™
ASSEMBLE THE END WALL FRAMES (CONTINUED)
14. Take the longer (12-2) support and the two brackets
(110 & 65-1). Insert the top bolt of the 12-2 support
through the pre-drilled hole in the upper support. Insert
the next 3 bolts into the pre-drilled holes of the 110
bracket. Position the angle of the bracket along the
lower edge of 12-2 support. See photo below.
Brackets
110
65-1
15. Select the next bolt in the 12-2 support and insert the
bolt into the pre-drilled hole of the 65-1 rectangular
bracket. Insert the remaining two (2) bolts in the header
(65) track into the remaining holes of the 65-1 bracket.
Align Bracket 65-1 with the edge of the 110 bracket.
110
65-1
12-2
To this point the end frame should resemble the photo
below.
Base Rail Location
10
16. Locate a remaining bolt in the bolt track of the short
12-1 support and attach one horizontal brace (19) to
the bolt. Do not tighten the bolt at this time.
17. Move to the angled bracket (18) and attach the brace
using the bolt as shown.
Upper Support
(15)
19
65
18. Repeat steps to attach the remaining horizontal
brace (19) to the 12-2 support and the 14A end frame
support.
14A
19. Attach the remaining diagonal strut (19).
12-1
Bolt
19
Horizontal Brace
Diagonal Strut
12-2
19
Revision date: 01.01.16
Advertisement
