Advertisement
ASSEMBLE THE GABLE END WALL FRAMES
The greenhouse has two end walls: one with a door and
one without a door. The end walls are packaged separately.
Each package includes all the parts required for that end
wall. For the best results and to prevent mixing parts,
assemble each end wall separately as described below.
NOTE: All bolt tracks in the frame members are installed to
the inside of the greenhouse. All diagrams and individual
photos shown in these end wall instructions show the inside
surface of the frame unless otherwise noted.
Bolt Track
Photo shows vertical frame member for end walls. The bolt
track is installed to the inside of the greenhouse.
IMPORTANT: To prevent loosing parts, assemble all
frame components on a flat surface. A concrete driveway
or a garage floor works best. Cover surface to protect
greenhouse finish. As you assemble the frame sections,
the inside of the frame will face up as shown in the photos
that follow.
Complete the following steps to assemble the first end wall
frame. Consult the End Frame Diagrams near the back of
these instructions before you begin.
1. Open the package that includes the parts to assemble
the gable end frame that includes the door frame parts.
Consult the End Frame Diagram – Door End in the
Quick Start section (back) for part identification. Parts
may be packed in different poly bags.
2. Locate the top bracket used to join the upper supports
to long, lower support at the peak of the end wall.
17
Revision date: 01.01.16
GROWSPAN
ESTATE ELITE ATTACHED GREENHOUSES
™
3. Locate the two supports for the end wall.
14A
The upper support includes pre-drilled holes and a
beveled edge. The long, lower support is attached to
the upper support by the top bracket. The long, lower
support is the support at the back of the greenhouse
and is used to attach the greenhouse to another
structure.
4. With the upper supports positioned as shown below,
secure the 17 bracket to the supports.
14A
View shows the supports as seen from the inside of the
greenhouse.
ATTENTION: TO AVOID TWISTING OFF OR DAMAGING
THE FASTENERS, DO NOT OVERTIGHTEN.
Use the fasteners in the extra parts bag or box to replace
lost or damaged fasteners.
Search the items in the extra parts bag or box before you
call Customer Service to request replacement parts.
15
17
15
17
7
Advertisement
