Required Tools; Safety Precautions; Assembly Procedure; Care And Maintenance - FarmTek PolyMax 108293 Quick Start Manual

GREENHOUSE BENCH KITS
READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE BENCH.
Thank you for purchasing this PolyMax® Bench System.
When properly assembled and maintained, this product will
provide years of reliable service. These instructions include
helpful hints and important information needed to safely
assemble and properly maintain the product. Please read
these instructions before you begin.
If you have any questions during the assembly, contact
Customer Service at 1-800-245-9881 for assistance.

SAFETY PRECAUTIONS

• Wear eye protection.
• Wear gloves when handling metal tubes.
• Use a portable GFCI (Ground Fault Circuit Interrupter)
when working with power tools and cords.

ASSEMBLY PROCEDURE

Following the instructions as presented will help ensure the
proper assembly of your bench.
The steps outlining the assembly process are as follows:
1. Verify that all parts are included in the shipment. Notify
Customer Service for questions or concerns.
2. Read these instructions and all additional
documentation included with the shipment before you
begin.
3. Gather the tools and assistants needed to assemble
the product.
4. Assemble the components in the order they are
presented in these instructions.
5. Assemble the frame.
6. Install and secure the PolyMax®.
7. Read the care and maintenance information.
8. Complete and return all warranty information as
instructed.
2

REQUIRED TOOLS

The following list identifies the main tools needed to
assemble the feed bunk. Additional tools may be needed.
• Tape measure or measuring device
• Marker
• Variable speed drill and impact driver (cordless with
extra batteries works best)
• Hammers, gloves, and eye protection
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the bench.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets and this assembly guide.
2. Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
diagrams throughout these instructions for clarification,
or contact Customer Service.
NOTE: At this time, you do not need to open the plastic
bags containing the fasteners (if used).

CARE AND MAINTENANCE

Proper care and maintenance of your bench is important.
Check the following items periodically to properly maintain
your bench.
• Check connections and all fasteners to verify that they
remain tight.
• Do not climb or stand on the bench at anytime.
• Replace all worn or damaged parts promptly.
• If the bench is moved, inspect all parts and
connections before reassembling and use.
• For replacement or missing parts, call 1.800.245.9881
for assistance.
Revision date: 10.26.21