Advertisement
GROWSPAN
ESTATE ELITE ATTACHED GREENHOUSES
™
ASSEMBLE THE END WALL FRAMES (CONTINUED)
5. Locate the remaining angled bracket and attach it to
the end of the upper support. Do not tighten bolts at
this time.
Upper Support (15)
ATTENTION: Some upper supports may include a
bolt track instead of the pre-drilled holes as shown in
the photo. If so, slide bolts into the track and attach
bracket.
6. Select the short, lower support, slide two bolts into the
bolt track, and attach the lower support to the angled
bracket as shown below.
18
Lower Support (14)
REMINDER: Brackets are installed on the inside of the
shelter.
8
18
Slide bolt head
through here.
7. Attach the lower support to the angled bracket using
nuts and the bolts in the track. Insert bolts through
drilled holes of the bracket. Do not tighten bolts at this
time.
Attach Strut Here
Lower Support (14)
8. Verify that the four bolts are loose and place the
template into position as shown in the photos below.
18
template
ATTENTION: The template is used to set the proper
clearance for the gutter rail. The template slides into
the slots in each frame member.
9. With the template in position, tighten the upper bolts to
secure the bracket to the upper frame member (15) of
the end wall. See the arrows above.
Upper Support (15)
18
15
Template
18
14
Revision date: 01.01.16
Advertisement
