Advertisement
GROWSPAN
ESTATE ELITE ATTACHED GREENHOUSES
™
INSTALL THE ROOF RAFTERS (CONTINUED)
4. Install the corner bracket (94). After installing all bolts,
tighten all nuts.
Gutter Rail
NOTE: Photo above shows the 104715 frame that
includes a 2-piece gutter rail. The 104711 and 104713
do not include the additional gutter rail brackets.
5. Attach the upper bracket (101) to the support (52).
(Actual number of bolts for brackets may differ from
what is shown in these photos.) Do not tighten bolts.
52
6. Using four (4) bolts in the double track sidewall support
(14), attach the lower bracket (100). Do not tighten.
14
Sidewall
Base Rail
ATTENTION: Verify that you have one additional
bolt remaining in the track of the sidewall support
(14) to attach the 103 brace. See Step 9 in the next
column. Remove bracket and add a bolt if needed.
18
52
94
14
101
Upper Support
Bracket (101)
Lower Support
Bracket (100)
7. Attach the diagonal brace (102) to the support brackets
(100 and 101). Tighten bolts.
52
101
Diagonal
Brace
Upper Bracket
8. Once the diagonal brace (102) is in place, tighten all
nuts and bolts on brackets.
9. Using the remaining bolt in the track of sidewall support
(14), attach the horizontal brace (103). Do not tighten;
allow brace to freely move along vertical.
Sidewall Support
Horizontal
Brace (103)
NOTE: Frame shown may differ slightly from actual
frame; assembly is the same.
10. Secure the remaining end of the horizontal brace (103)
to the diagonal brace (102).
11. Verify that the 103 brace is level and tighten the bolts.
14
100
Diagonal
Brace
Lower Bracket
(14)
Diagonal
Brace (102)
Revision date: 01.01.16
102
Advertisement
