Manually Configure Pc To Connect To The Connect It - Digi Connect IT 16 User Manual

Work with the web UI (web user interface)
3. Type in the IP address for the Connect IT: 192.168.210.1
Note If the device does not give your PC an IP address via DHCP, you may need to configure
your PC with the static IP settings. See
4. Press Enter. The login screen displays.
5. Enter the user name and password:
User Name: The default user name is: root
n
Password: The default password for the Connect IT is printed on the label attached to
n
the device. Once you are logged in you can
6. Click Log in. The Connect IT local web user interface appears.
Manually configure PC to connect to the Connect IT
To manually connect to the device, you must manually set an IP address on your PC to be able to
communicate with the Connect IT.
1. Select the Properties of the relevant network connection on the Windows PC.
2. Click the Internet Protocol Version 4 (TCP/IPv4) parameter.
3. Click Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties dialog appears.
Digi Connect IT® 16/48 User Guide
Manually configure PC to connect to the Connect IT
Manually configure PC to connect to the Connect
change the password.
IT.
52