Front Panel And Leds - Digi Connect IT 16 User Manual

Hardware

Front panel and LEDs

Item Name
1 Power
2 Status
Digi Connect IT® 16/48 User Guide
Description
The LED lights up when the power is supplied to the device and the
device powered on.
Solid blue: The LED is solid blue when the power source is
n
connected and power is being supplied to the device.
Flashing blue: The Connect IT is shutting down, caused by
n
pressing the ACPI power button.
Red: The LED is red when the power supply has failed.
n
The LED lights up when the Connect IT starts up or you have
activated the find me feature.
Flashing blue: The LED flashes blue once per second when
n
the Connect IT starts up or you have activated the find me
feature. When starting up, the WWAN Signal, WWAN Service,
and Status LEDs on the back of the Connect IT also flash.
Solid blue: The Connect IT initialization is complete.
n
Red: The Connect IT has had start-up failure.
n
57