Table of Contents
Advertisement
Configure the Connect IT 16/48
7. Click Save or Apply.
Configure a modem
You can enable a modem in the Connect IT and configure the modem to enable gateways and network
interfaces.
Configure the modem
You can configure the modem in the Connect IT.
1.
Log in
to manage the Connect IT.
2. Access the modem settings.
local web UI: Click Configuration in the left pane and then expand the Modem section.
n
Remote Manager: Click Config > Network and then expand the Modem section.
n
3. Configure the settings.
Setting
Enable
Interface type
Zone
Device
Digi Connect IT® 16/48 User Guide
Description
Select Enable to enable the network interface.
The address configuration method for the network interface.
Modem: The address is determined by the cellular
n
modem.
The default is Modem.
The firewall zone assigned to this network interface. This can
be used by packet filtering rules and access control lists to
restrict network traffic on this interface.
The default is External.
The modem used by this network interface.
The default is Modem.
Configure a modem
31
Advertisement
Table of Contents
