Table of Contents
Advertisement
Configure the Connect IT 16/48
9. Configure the outlets on the power controller that can be controlled by the port.
a. Click Outlets to expand the outlet section.
b.
c. In the Outlet index field, enter the appropriate outlet index. Refer to the manual
d. Repeat the process to configure additional outlets.
10. Click Save or Apply.
Create an access control group for power management and assign to
users
You can create an access control group that enables users to control a power outlet from inside a
terminal session. For each access control group, you can configure a serial port and the associated
outlets, and then assign the group to users that are allowed access to the outlets on that port.
Note
For information about accessing and using a terminal session, see
a terminal (all
users).
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Authentication
3. Expand the Groups section.
4.
Add a
group.
5. Select the Serial access option.
6. Configure the serial port for the group.
a. Expand the Serial ports section.
b. Click Add or +.
c. From the Port list box, select a port for the group. The port should have been
7. Select the Power outlet access option.
8. Configure the power outlets for the group.
a. Expand the Power outlets section.
b. Select the Power outlet access option.
c. Click Add or +.
d. From the Outlet list box, select an outlet for the group.
e. Repeat the process to add additional outlets.
9. Assign the power management group to the users that should have access to the ports in the
group. See
10. Click Save or Apply.
Digi Connect IT® 16/48 User Guide
Define an outlet on the power
the outlet and then click Add.
for your power controller to determine the outlet index.
previously configured. See
Create a user profile and assign an access control
Configure Remote Power Management
controller. In the Add Outlet field, enter a name for
screen.
Configure a serial port for Power
group.
Control the outlet power from
Management.
23
Advertisement
Table of Contents
