Explicit Assignment Mechanism - Alcatel AST570 User Manual

12.2.4

Explicit Assignment Mechanism

Explicit assignment
Explicit assignment
example
Note
3EC 17766 AAAA TCZZA Ed. 04
In the case of a remote access server which is not
RFC1577/RFC2225 compliant, it will not respond to InATMARP
requests.
As a consequence, the AST570 can not retrieve the remote IP
address to assign the CIP PVC to the CIP member.
Therefore you must explicit assign a remote IP address to the CIP
PVC.
The default configuration of the AST570 is an example of the
explicit assignment of a CIP PVC to a CIP member:
In the 'CIP Interfaces' table, the CIP member is configured as
follows:
In the 'CIP Connections' table, the remote IP address is statically
configured:
Consequently, CIPPVC1 is explicitly assigned to cip0.
Both local and remote IP addresses must fall within the same IP
network and IP subnetwork, according the LIS parameters.
12 Configuration and Use - CIP & IP Routing
135 / 300