Alcatel AST570 User Manual page 86

9 Configuration and Use - Routed PPPoE
Adding entries
Detailed configuration
Deleting entries
86 / 300
Proceed as follows:
1. Browse to the 'PPP' page.
2. If needed, click
3. Select the PPPoE protocol from the 'Protocol' pop down list.
4. Select the phonebook entry from the 'Address' pop down list.
You must use a ETHoA or any type" phonebook entry for
Routed PPPoE connections.
Note: In case the presented phonebook entries do not suite your desired
configuration, you must firstly create a correct phonebook entry. See
section 13.2 for more information.
5. Select the encapsulation method for the Routed PPPoE entry
from the 'Encapsulation' pop down list.
6. Optionally, enter user name and password for the Routed
PPPoE entry.
Note: In case you do not enter this information it is asked each time you
open the Routed PPPoE session.
7. Optionally, enter the appropriate configurations in the
'Detailed Configuration' table.
See section 9.4 for more information.
8. Click
Prior to using the PPPoE entry you may need to enter additional
configurations for the connection.
See section 9.4 for more information.
On the 'PPP' page, click
want to delete. As a result your selection is highlighted.
Click and
.
and to finish the procedure.
next to the PPPoE connection you
.
3EC 17766 AAAA TCZZA Ed. 04