Routing' Configurations - Alcatel AST570 User Manual

11.4.1

'Routing' Configurations

Introduction
Advanced routing
In this subsection
The 'Routing' tab
3EC 17766 AAAA TCZZA Ed. 04
If a PPP session is opened successfully (either manually by the user,
triggered by (W)LAN traffic or automatic at boot time) routes are
automatically added to the AST570' routing table.
For advanced users, the AST570 allows manual configuration of
permanent routes to dedicated destinations.
See section 14.5 for more information on the AST570' IP router.
Moreover, routes can be configured via the CLI which will only be
added to the IP route table upon establishing the PPP connection.
See chapter 22 for more information on the CLI.
'Routing' Tab
"
Connection Sharing
"
Connection Sharing Subnet Values
"
'My net only' Configuration
"
Destination Networks
"
Destination Networks Subnet Values
"
Address Translation.
"
The following figure shows the 'Routing' tab:
11 Configuration and Use - Routed PPPoA
119 / 300