Alcatel AST570 User Manual page 187

Enabling an AST570
DHCP client
The AST570 as DHCP
client
3EC 17766 AAAA TCZZA Ed. 04
Proceed as follows:
1. If needed, click
2. In this table if needed, click
3. Select the interface you want to enable DHCP for from the
'Interface' pop down list:
Select eth0 in case you want to enable the DHCP client
D
for the AST570 itself
Select the Routed Ethernet entry in case you want to
D
enable the MER DHCP client.
4. Optionally enter one or more of the following fields:
'IP address'
D
'Client ID'
D
'Host name'
D
'Lease time'.
D
5. Click . As a result the DHCP client is enabled.
6. Click
storage.
Internet
Access Point
on the 'DHCP' page.
to store the applied lease to permanent
ATM
Network
14 Networking Services - IP
.
IP Address
AST570
DHCP Client
IP Address
DHCP Server
187 / 300