Table of Contents
Advertisement
15 Networking Services - DNS
Configuring the DNS
server
Adding DNS leases
manually
Resetting the DNS
server
202 / 300
Check the 'Server active' checkbox to enable the AST570 DNS
server.
In the 'Domain name' field you can enter the domain name of
your (W)LAN. You may use a DNS subdomain name, e.g.
dsl.wireless.office.lan.
This name is communicated by the DNS server to the local PCs,
and is subsequently used by the PCs to complete a DNS request.
The 'DNS hostname' table allows you to configure DNS leases
manually, e.g. for devices which do not support DNS.
Proceed as follows:
1. In this table if needed, click
2. Enter the following information in the 'DNS hostname' table:
The DNS hostname for the device
D
The IP address of the device.
D
3. Click
To reset the AST570 DNS server and clear all current DNS host
entries, proceed as follows:
1. Browse to the 'DNS' page.
2. If you are sure to reset the AST570 DNS server, click
in the 'DNS server Configuration' table.
3. The AST570 will ask to confirm the reset:
4. Click
if you are sure. Otherwise click
5. Click
6. Press the reload button of your Web browser.
and
to finish the procedure.
to make the reset permanent.
.
3EC 17766 AAAA TCZZA Ed. 04
.
Advertisement
Table of Contents
