Ast570 Connections - Alcatel AST570 User Manual

1 Speed Touch Quick Guide
1.2.2

AST570 Connections

You must wire
Ethernet port
(10Base T), if needed
DSL port (Line)
Power port (DC)
16 / 300
The Ethernet Port (10Base T), if needed
"
The DSL Port (Line)
"
The Power Port (DC).
"
After performing these steps you can turn on your AST570.
Proceed then with connecting:
Your WLAN clients.
"
Use the included LAN cable to wire your PC's Ethernet port to
AST570' Ethernet interface.
Note: In case no wired Ethernet connections have to be made, you can omit
this step and continue with wiring the DSL port.
Refer to section 2.2 for more information.
Use the included DSL cable to wire the AST570' Line port to your
DSL wall outlet.
Refer to section 3.2 for more information.
Firstly check whether the included mains adapter suits the local
power specifications. If you are not sure of the regional power
conditions, check the adapter's specifications in section D.5 and
contact your local power company.
Plug the adapter's coaxial jack into the AST570' receptacle
marked 'DC'.
Refer to section 3.3 for more information.
3EC 17766 AAAA TCZZA Ed. 04