Alcatel AST570 User Manual page 116

11 Configuration and Use - Routed PPPoA
116 / 300
Field Description
Link Indicates the link state of the PPP entry.
It can take following values:
Value
idle
Connected The PPP entry is active, i.e. it tries to
State Indicates the active state of the PPP session.
It can take following values:
Value
Up
Down
Trying
Protocol Indicates the packet service type for the PPP connection.
It can take following values:
Protocol
PPPoA
PPPoE
Encapsulation Indicates the applied encapsulation method for the PPP
frames on the VC.
The AST570 supports both the LLC/SNAP method (default
for Routed PPPoE Ethernet frames) and the VC MUX method
(default for Routed PPPoA PPP frames).
User For authentication purposes a user name and password is
required. These credentials are supplied by the SP .
Password
Per default a guest account is assumed, i.e. both user name
and password are guest". In case the SP has a guest
account, you are able to open a session without having an
actual subscription.
Description
The PPP entry is not activated, i.e. it
does not setup a PPP connection.
setup a PPP connection, or PPP
connectivity is achieved.
Description
The PPP session is opened and active.
The PPP session is closed, the PPP
connection is idle.
The PPP session is trying to reach the
active state.
Description
The PPP connection is a Routed PPPoA
connection.
The PPP connection is a Routed PPPoE
connection.
3EC 17766 AAAA TCZZA Ed. 04