Using Bridging - Alcatel AST570 User Manual

6.2

Using Bridging

Bridging configuration
Using Bridging
3EC 17766 AAAA TCZZA Ed. 04
There are no default Bridging entries.
Therefore, configure an appropriate entry as follows:
1. If needed, add an ETHoA phonebook entry with the correct
VPI/VCI on the 'Phonebook' page.
2. On the 'Bridge' page, select this phonebook entry from the
'Address' pop down list.
3. For this entry, select the correct encapsulation method from
the 'Encapsulation' pop down list.
4. Click .
See section 6.3 for more information.
Make sure your AST570 is turned on first.
Turn on your PC(s), start your Web browser and you are on the
Internet or have Corporate Intranet access.
Although the access method of the bridge is 'Always on', the
remote organization might ask for a user name and password.
6 Configuration and Use - Transparent Bridging
65 / 300