Alcatel AST570 User Manual page 84

9 Configuration and Use - Routed PPPoE
During the session
Closing dial in PPPoE
sessions
84 / 300
5. If applicable an 'Authentication' table pops up:
Enter your user name and password in the appropriate fields.
If you want the AST570 to remember your credentials, check
'Save password' (n).
6. Click .
7. After identification and authentication the 'PPP connections'
page reappears.
While the AST570 tries to open the session 'trying' will
appear in the 'State' field. Once the session is active the field
displays 'up'. From then you are online and you can start
your application or browse the Internet.
During the time the session is up, you can overview some
important connection statistics on the 'PPP' page.
See section 9.4.4 for more information.
Proceed as follows:
1. Browse to the 'Dial in' page.
2. Active PPPoE sessions are indicated via up in the 'State' field.
Click next to the active PPPoE entry in the list you want to
close the session for. As a result your selection is highlighted.
3. Click
The session state of the PPPoE entry will change to down, i.e.
it becomes idle.
.
3EC 17766 AAAA TCZZA Ed. 04