Alcatel AST570 User Manual page 51

Allowing and rejecting
a WLAN client
Removing a WLAN
client from the 'Access
Control' list
3EC 17766 AAAA TCZZA Ed. 04
To enable future association for a currently joined WLAN client:
1. In the 'Access Control' table select the authorization status
for the WLAN client from the 'Enabled' pop down list next to
the WLAN client adapter's MAC address.
Future joining will be allowed for this client without the need
of using the 'Associate' button every time
2. Click to finish the procedure.
To reject a WLAN client, listed in the 'Access Control' table:
1. Select the authorization status
'Enabled' pop down list next to the WLAN client adapter's
MAC address.
A rejected WLAN client will never be allowed to traffic the
AST570 WLAN network, even when
the 'Association' button is pressed.
2. Click to finish the procedure.
To remove a WLAN client from the list you click
the WLAN client adapter's MAC address you want to delete the
authorization for.
As a result the WLAN client is removed from the 'Access Control'
list. It is not able to traffic the AST570 WLAN anymore. To re join,
you must click
Removing a WLAN client from the 'Access Control' table is not
advised in case future joining of this client is not desired, as in this
case a future re association might be possible in case
is clicked or the 'Association' button is pressed. Rather disable
future association possibilities by rejecting the WLAN client.
Note: You can also flush the complete 'Access Control' list, i.e. delete all joined
WLAN clients. Therefor, click
4 WLAN Guide - Wireless LAN
for the WLAN client from the
No
again or press the 'Association' button.
.
Yes
is clicked or
next to
51 / 300