Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Alcatel OneTouch Home H200
Summary of Contents for Alcatel OneTouch Home H200
- Page 1 User Manual...
- Page 2 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 Channel Number Center Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462...
-
Page 4: Table Of Contents
User Manual of Onetouch-H200 3G Router Table of Contents Hardware Description and Device connection ......2 Hardware Description ............ 2 1.1.1 LED Indicator Status ..........2 1.1.2 Interface Description ..........3 Device Connection ............3 1.2.1 Device Install ............3 PC Setting .................. -
Page 5: Hardware Description And Device Connection
User Manual of Onetouch-H200 3G Router Hardware Description and Device connection Hardware Description 1.1.1 LED Indicator Status This 3G router contains 8 LED indicators. User can easily check the situation of device by observing LED indicator’s status Definition of LED Indicators follows below table. LED Indicator Status Description... -
Page 6: Interface Description
User Manual of Onetouch-H200 3G Router LED Indicator Status Description Disconnected to network 1.1.2 Interface Description Interface and button description follows the below table. Interface/Button Description SIM slot Place to insert SIM card VOIP Voice interface (RJ11) for phone connection Lan1/2 LAN port for switch, concentrator and PC with network adaptor... -
Page 7: Pc Setting
User Manual of Onetouch-H200 3G Router PC Setting In default setting, the IP address of LAN of the device is 192.168.1.1, DNS server address is 255.255.255.0，DHCP Server on. When PC connected to Onetouch-H200, normally the user needs to set the TCP/IP of PC according to follow procedure. - Page 8 User Manual of Onetouch-H200 3G Router Step 4: Normally the user should choose “Obtain an IP address automatically, then Click “OK”. Also the user can choose “Use the following IP address” as below pictures, set “IP address” as 192.168.1.X (any figure from 2-254), DNS server address as 255.255.255.0.
-
Page 9: Wifi Connection
User Manual of Onetouch-H200 3G Router Note: 192.168.1.1 is the default IP address of LAN of the 3G router. If the IP address has been changed, please modify the IP address to current one. Step 6: if connected successfully, the page will show like below. WIFI Connection The connection of WIFI adaptor of PC to OneTouch-H200 should follow below steps. -
Page 10: Web Configuration
User Manual of Onetouch-H200 3G Router Step 2: Choose the right WIFI hotspot, click “Connect”, when it shows “connected”, it means PC has been connected to WIFI. Note: Default SSID ofOneTouch-H200 is H200-XXXX (XXXX is the last four digits of its Mac) Step 3: If you have problem with the SSID of the device, please log on the device, choose “Wireless Setup”-“Basic Setup”, then check the current SSID. -
Page 11: Language Setting
User Manual of Onetouch-H200 3G Router Language Setting After log on Web page, user can set the language in the up-right part of web page. Simple Chinese and English have been offered. User can choose either one of them, then click “Apply”. Setup Wizard Through Setup Wizard, user can configure basic networkparameter. - Page 12 User Manual of Onetouch-H200 3G Router Description of the page is like below table. Domain Description Choose the ISP that provides the SIM card Account Input the account provided by ISP Password Input the password provided by ISP Dial Number Input the dial number provided by ISP (Default setting as above) Modem Baudrate...
-
Page 13: Network Setup
User Manual of Onetouch-H200 3G Router Description of the page is like below page. Domain Description Enable When click-on, the WIFI LED indicator will be green-lighted, client can connect to the router through WIFI SSID Wireless network name. Maximum the SSID can contain 32 character, including letter, digit, underline. - Page 14 User Manual of Onetouch-H200 3G Router In above page, user can configure the relevant parameter according to actual requirement. Domain Description 2G/3G AUTO/2G/3G。 Choose the ISP that provides the SIM card Account Input the account provided by ISP Password Input the password provided by ISP Dial Number Input the dial number provided by ISP (Default setting as above)
- Page 15 User Manual of Onetouch-H200 3G Router Domain Description Auto Connect: when the user chooses “Auto Connection Mode Connect”, the system will connect automatically. If disconnected by other reason, the system will try to re-connect every 10 seconds. If the user pay monthly for the service, it is recommended to adopt this mode.
-
Page 16: Wireless Setup
User Manual of Onetouch-H200 3G Router Wireless Setup 4.4.1 Basic Setup Click “Wireless Setup”-“Basic Setup” Domain Description Region Choose the region you are located in Enable SSID When enable SSID broadcast, the SSID will be Broadcast broadcasted in wireless network and visible to user. Enable Wireless When enable wireless isolation, the same SSID user can’t... - Page 17 User Manual of Onetouch-H200 3G Router Domain Description Choose the wireless mode, default as “Mixed 802.11b/g/n” Mode 802.11b only–Maximum Rate is 11 Mbps。 Mixed 802.11b/g –Compatible with 802.11b and 802.11g Mixed 802.11b/g/n –Compatible with 802.11b, 802.11n and 802.11g Choose wireless network channel.