8 Configuration and Use - Bridged PPPoE
8.1
Preparatory Steps
Needed information
Multiple destinations
PC(s)
78 / 300
VPI/VCI value of the VC(s) to use on the DSL line
"
ETHoA (RFC1483/Bridged) connection service must be
"
supported on this VC
Encapsulation method (LLC/SNAP)
"
Remote access server must be a PPPoE server
"
PPPoE client to be installed
"
User name and password for your user account.
"
Up to four simultaneous Bridged PPPoE sessions can be active.
Note: Per active Bridged PPPoE session a dedicated Bridging entry must be
made available on the AST570. See section 8.3 for more information.
To use Bridged PPPoE, a PPPoE client must be installed on your PC.
The SP will provide the PPPoE client software. Contact him for
more information.
3EC 17766 AAAA TCZZA Ed. 04