The Ast570 Dhcp Server - Alcatel AST570 User Manual

14 Networking Services - IP
14.4.2

The AST570 DHCP Server

In this subsection
'DHCP Server Start up
Mode' table
Configuring the AST570
for a (W)LAN without
DHCP
180 / 300
The 'DHCP Server Start up Mode' Table
"
Configuring the AST570 for (W)LANs without DHCP Server
"
Configuring the AST570 as DHCP Server
"
Configuring the AST570 for Auto DHCP
"
The AST570 as DHCP client
"
'DHCP Server Configuration' Table
"
Address Pool Configuration
"
PPP Spoofing Configuration
"
'DHCP Server Lease' Table
"
Adding Leases Manually.
"
On the AST570 'DHCP Server' page the 'DHCP Server Start up
Mode' table allows to configure the AST570 DHCP server
behavior:
To setup the AST570 without DHCP , tick
In this configuration it is assumed that all members, the AST570
included, have static IP addresses.
See subsection 14.3.2 for static IP addressing of the AST570.
Note: This configuration might be required in case you use the Transparent
Bridging packet service.
.
3EC 17766 AAAA TCZZA Ed. 04