Alcatel AST570 User Manual page 146

12 Configuration and Use - CIP & IP Routing
Assigning CIP PVCs to
CIP members
Deleting CIP entries
146 / 300
Proceed as follows:
1. Browse to the 'CIP' page.
Assignment of a CIP PVC is performed in the 'CIP
Connections' table.
2. If needed, click
3. Select the phonebook entry from the 'Destination' pop down
list.
You must use a IPoA or any type" phonebook entry for CIP
connections.
Note: In case the presented phonebook entries do not suite your desired
configuration, you must firstly create a correct phonebook entry. See
section 13.2 for more information.
4. Depending the RFC1577/RFC2225 compliancy of the remote
access router the following must be entered in the 'Remote
address' field:
Compliancy
YES
NO
5. Click
On the 'CIP' page, click
interface you want to delete. As a result your selection is
highlighted.
Click and
in the 'CIP Connections' table.
Remote IP address
You don't have to fill in anything; the InATMARP reply will
implicitly assign the PVC to the CIP member.
You must fill in the exact IP address of the remote access
router; the PVC is explicitly assigned to the CIP member.
and to finish the procedure.
next to the CIP connection or CIP
.
3EC 17766 AAAA TCZZA Ed. 04