Alcatel AST570 User Manual page 212

16 Security Services - NAT & PAT
The 'NAT Settings'
table
'NAT Settings' table
components
212 / 300
The following figure shows the 'NAT Settings' table:
Field Description
Nr Indicates an index number for the static NAT entry..
Type Indicates the template used for the NAT entry.
In case dynamic addresses are used to connect to the WAN
side, e.g. for PPP connections where the AST570 receives a
different IP address each time the connection is established,
the AST570 allows to save the NAT settings in a template.
That way you don't have to specify which of the AST570' IP
addresses to use.
Inside IP Indicates the IP address and port of the local PC to which
traffic is to be redirected.
Inside port
The 'Inside address' field indicates both IP address and port
Inside address
as IP:PORT.
Note: The inside port must only be specified for the TCP and
UDP protocols. All other protocols do not need a port to be
specified.
3EC 17766 AAAA TCZZA Ed. 04