Preparatory Steps - Alcatel AST570 User Manual

10 Configuration and Use - Relayed PPPoA

10.1 Preparatory Steps

Needed information
Multiple destination
PC(s)
TCP/IP
94 / 300
VPI/VCI value of the VC(s) to use on the DSL line
"
PPPoA (RFC2364) connection service must be supported on
"
this VC
Encapsulation method (VC MUX)
"
Remote access server must be a PPP(oA) server
"
User name and password for your user account.
"
The AST570 can manage up to 12 Relayed PPPoA connections
simultaneously.
Note: Check with your SP or corporate whether multiple end to end connectivity
is enabled.
Your PC must support Point to Point Protocol (PPP) and
Point to Point Tunnelling Protocol (PPTP).
Note: All Microsoft Windows platforms support PPP and PPTP .
A PPTP Dial Up application must be installed on your PC.
Note: All Microsoft Windows platforms have a PPTP Dial Up application
installed per default.
Before you can establish PPTP tunnels, you must configure:
A local IP address in each PC which initiates a PPTP tunnel
"
A local IP address in the AST570 which terminates the PPTP
"
tunnel(s).
See chapter 14 for more information on IP .
3EC 17766 AAAA TCZZA Ed. 04