IBM Power System Series Problem Analysis, System Parts, And Locations page 33
Hide thumbs
Also See for Power System Series:
- Handbook (336 pages) ,
- Manual (296 pages) ,
- Site and hardware planning (206 pages)
Table of Contents
Advertisement
Table 8. OEM record de specific log information and service action (continued)
OEM record de specific log information
08xxxxxxxxxx
09xxxxxxxxxx
0Axxxxxxxxxx
10xxxxxxxxxx
11xxxxxxxxxx
16xxxxxxxxxx
1Cxxxxxxxxxx
22xxxxxxxxxx
2Dxxxxxxxxxx
30xxxxxxxxxx
31xxxxxxxxxx
34xxxxxxxxxx
37xxxxxxxxxx
Service action
Go to "EPUB_PRC_ALL_PROCS isolation
procedure" on page 50.
Go to "EPUB_PRC_ALL_MEMCRDS isolation
procedure" on page 51.
Go to Getting fixes and update the system
firmware to the most recent level of firmware
that is available. If this SEL event continues to be
logged, go to "Collecting diagnostic data" on
page 60. Then, go to "Contacting IBM service
and support" on page 61.
Go to "EPUB_PRC_LVL_SUPPORT isolation
procedure" on page 52.
Go to Getting fixes and update the system
firmware to the most recent level of firmware
that is available. If this SEL event continues to be
logged, go to "Collecting diagnostic data" on
page 60. Then, go to "Contacting IBM service
and support" on page 61.
Go to Getting fixes and update the system
firmware to the most recent level of firmware
that is available. If this SEL event continues to be
logged, go to "Collecting diagnostic data" on
page 60. Then, go to "Contacting IBM service
and support" on page 61.
Go to Getting fixes and update the system
firmware to the most recent level of firmware
that is available. If this SEL event continues to be
logged, go to "Collecting diagnostic data" on
page 60. Then, go to "Contacting IBM service
and support" on page 61.
Go to
"EPUB_PRC_MEMORY_PLUGGING_ERROR
isolation procedure" on page 52.
Go to "EPUB_PRC_FSI_PATH isolation
procedure" on page 52.
Go to "EPUB_PRC_PROC_AB_BUS isolation
procedure" on page 53.
Go to " EPUB_PRC_PROC_XYZ_BUS isolation
procedure" on page 54.
Go to Getting fixes and update the system
firmware to the most recent level of firmware
that is available. If this SEL event continues to be
logged, go to "Collecting diagnostic data" on
page 60. Then, go to "Contacting IBM service
and support" on page 61.
Go to "EPUB_PRC_EIBUS_ERROR isolation
procedure" on page 55.
Beginning troubleshooting and problem analysis 19
Advertisement
Table of Contents
